Low Headroom Single Beam Electric Wire Hoist With C-shaped design
European Style 16T 15M
| model | | VTW-S 16T |
| SWL | t | 16 |
| lifting height | m | 15 |
| lifting speed | m/min | 0.66/4.0 |
| travel speed | m/min | 5-20 |
| power in | V;HZ | 220~460V 50/60Hz |
| FEM(GB) | -- | 2m(M5) |
| lifting motor | power | KW | 2.6/16 |
| RPM | n/min | 460/2770 |
| insulation | -- | F |
| production | -- | IP55 |
| duration | -- | 40% |
| rated current | A | 33 |
| lift gear ratio | -- | 169 |
| drum dia | mm | 295 |
| wire rope | -- | 15-8*26S+2160 |
| travel motor | power in | KW | 2*0.75 |
| RPM | n/min | 35.2-140.8 |
| insulation | -- | F |
| production | -- | IP55 |
| duration | -- | 60% |
| rated current | A | |
| wheel dia | mm | 150 |
1. Clear core parameters:
Rated lifting capacity: 16 tons (16,000 kg) - This is the maximum
weight it is designed to lift safely.
Lifting height: 15 meters - Refers to the vertical distance from
the lowest position to the highest position of the hook (usually
measured from the ground or reference plane).
2. European design features:
Compact structure and light weight: Compared with traditional
hoists, European design uses optimized structure and materials
(such as high-strength alloy steel), which significantly reduces
the overall size and weight. This reduces the load requirements on
plant structures (such as crane beams) and saves construction
costs.
Three-in-one drive mechanism: The lifting motor, reducer and drum
(wire rope winding device) are highly integrated in a compact unit.
This design has high transmission efficiency, good structural
rigidity, and easy installation and maintenance.
High-performance lifting motor:
Equipped with a built-in disc brake, automatic braking when power
is off, safe and reliable. The motor usually has a thermal
protection function.
Wire rope and drum: Use high-strength, wear-resistant, and
torsion-resistant galvanized wire rope (such as 6x36WS+IWRC or
similar structures). The drum design is optimized to ensure that
the wire rope is neatly arranged to reduce wear and the risk of
rope disorder. Usually with rope grooves.
Hook device: Equipped with high-strength forged alloy steel hook
(16 tons class) that meets international standards (such as FEM,
DIN). The hook usually has a safety tongue (lock) to prevent the
load from unhooking and can rotate freely 360°. Standard pulley
block (the ratio is designed according to tonnage and structure,
commonly 2/1 or 4/1).
Traveling trolley (if configured): If it is a traveling hoist
(which can travel on I-beam rails), its traveling trolley also
adopts a compact design. The running motor is usually also an
independent three-in-one structure (motor + reducer + wheel group),
and is also equipped with a disc brake. The running speed can be
selected according to needs (such as dual speed or variable
frequency control).
